If you live in Pearland, Texas, dealing with a toilet that keeps running water can be annoying and wasteful. A constantly running toilet not only increases your water bill but can also signal underlying issues in your plumbing system. Many homeowners wonder how to fix a running toilet themselves, and when it’s time to call a licensed professional.

At Accurate Plumbing, we help homeowners in Pearland, Friendswood, Clear Lake, and League City identify and resolve toilet issues, whether through simple DIY fixes or professional toilet repair services.

Why Is My Toilet Running Constantly?

A running toilet happens when water continues to flow from the tank into the bowl, often due to:

Understanding the root cause helps you decide whether a DIY fix is possible or if professional repair is needed.

DIY Fixes for a Running Toilet

Many running toilet problems are easy to address with basic tools. Here’s a step-by-step guide for running toilet repair DIY:

1. Inspect and Replace the Flapper

The toilet flapper is the rubber seal at the bottom of the tank. If it’s worn or misaligned, water continuously leaks into the bowl.

Steps:

  1. Turn off the water supply to the toilet
  2. Flush to empty the tank
  3. Inspect the flapper for cracks or mineral buildup
  4. Replace if necessary

💡 Tip: Flappers are inexpensive and widely available at hardware stores.

2. Adjust the Float

The float controls the water level in the tank. If it’s too high, water overflows into the tube, causing the toilet to run.

Steps:

  1. Identify the type of float (ball or cylinder)
  2. Adjust according to manufacturer instructions
  3. Test flush to ensure proper water level

3. Clean or Replace the Fill Valve

Sediment or wear can cause the fill valve to malfunction. Cleaning or replacing it often resolves running issues.

Steps:

  1. Turn off water supply
  2. Remove the valve and clean mineral buildup
  3. Replace if cleaning does not fix the issue

4. Check the Overflow Tube

Ensure the water level is below the top of the overflow tube. If water continually spills into it, adjust the float or replace the valve assembly.

When to Call a Plumber for Toilet Repairs

DIY fixes work for simple issues, but call a professional if you notice:

📞 Accurate Plumbing offers expert toilet repair in Pearland, TX
https://accurateplumbingtx.com/water-heater-services/

Professional plumbers ensure repairs are safe, long-lasting, and compliant with local plumbing codes.

Preventing Common Toilet Problems

To reduce the likelihood of running toilets:

Regular maintenance helps prevent common toilet problems and reduces water waste.

Resources for Pearland Homeowners

FAQs:

1. How do I know if my toilet flapper is bad?

Check for cracks, warping, or mineral buildup. If water constantly leaks into the bowl, replace the flapper.

2. Can I fix a running toilet myself?

Yes, simple issues like flapper replacement or float adjustment can be DIY fixes.

3. How much does toilet repair cost in Pearland, TX?

Simple repairs range from $100–$250, while complex plumbing issues may cost more.

4. How often should I inspect my toilet?

Inspect your toilet and flapper every 6–12 months for wear or leaks.

5. When should I call a plumber?

If DIY fixes fail or the toilet repeatedly runs, contact a licensed plumber for professional repair.

Call to Action

Stop wasting water and money on a running toilet. Schedule a professional toilet repair today!

📞 Call Accurate Plumbing at (713) 817-3977
🕒 24/7 Emergency Plumbing Services in Pearland, Friendswood, Clear Lake & League City
🌐 Book Now: https://accurateplumbingtx.com/contact/

Author Bio

Accurate Plumbing
📍 Pearland, Texas
📞 (713) 817-3977
Licensed & Insured plumbing experts specializing in toilet repair, emergency plumbing, and full-service plumbing solutions throughout Pearland and surrounding Texas communities.

 

Leave a Reply

Your email address will not be published. Required fields are marked *